Translate

Safety Interview Questions 11 contains questions about safety review of documents and drawings, safety precautions in construction,  erect scaffolding, Safety precaution of scaffold, Safety rules when using ladders, Safety rules in using compressed air,  Handling of compressed gas cylinders


101. What is your concept of safety review of documents and drawings? 

102. What is SHORING? 

103. General safety precautions in construction?

104. How to erect scaffolding?

105. Safety precaution of scaffold?

106. What control measures are necessary in confined space? 

107. Safety rules when using ladders? 

108.Safety rules insuring oxygen cylinders? 

109. Safety rules in using compressed air? 

110. Handling of compressed gas cylinders?

101. What is your concept of safety review of documents and drawings? 

The safety review of documentation is to decrease the system operation and serve as a permanent reference to the implementation to avoiding information – Dependent or Individuals. 

102. What is SHORING? 

Shoring is a support to prevent trench collapsing. If side of the trenches is unstable, soft or chances to collapse then shoring is essential. It is to be made by COMPETENT PERSONS.

103. General safety precautions in construction?

1. Adequate first aid equipment should be kept ready 

2. Adequate firefighting equipment should be available 

3. All general electrical rules should be followed 

4. Suitable lighting arrangements should be necessary at night work 

5. Work men at height should be wear safety belts 

6. Work men handling cement should be provided with goggles, rubber gloves and rubber boots by nose mask. 

7. The moving parts of grinding machines used construction site should be covered with guards 

8. The moving parts of grinding machines used construction site should be covered with guards 

9. Excavated material should not kept near the excavated 

10. Very short duration of work red flags must be hoisted and more duration red banners must be stretched 

11. Defective tools should not be used 

12. The worker should not carry tools in his hands when climbing a ladder 

13. Excavation should be guarded by suitable fencing

104. How to erect scaffolding?

1. It should be erected on levels firm ground 

2. It erected by trained / skilled person 

3. It is constructed using metal pipes and wooden boards

4. It should be design and constructed from good and sound material

5. Not to be erected on loose earth

6. Clamps should fixed 

7. Properly bracing 

8. Sole plate is necessary the base of vertical pipe

105. Safety precaution of scaffold?

1. Wooden board not is painted 

2. Wooden board should not to any cracks 

3. Check for rust in pipes / clamps 

4. Clamps should fixed and good quality 

5. Boards’ thickness should be 3.4 cms and no bending 

6. The construction must be rigid, properly based 

7. Use of good and sound materials 

8. The wooden bellies have not joints 

9. Vertical poles should not be more than 6 feet 

10. Chains, ropes used for the suspension of scaffoldings 

11. Never throw any materials from height 

12. Use safety harness while working at above 6 feet 

13. Properly ties to be arrangement

106. What control measures are necessary in confined space? 

1. Enter with airline BA sets 

2. Use 24v flame proof hand lamps 

3. A hole watch to be kept near man hole 

4. Keep firefighting equipment ready 

5. Gas test to be done to check for oxygen level 

6. Provide blowers 7. Don’t smoke in confined space 

8. Use ropes and harness 

9. The spaces clean before entry 

10. Use non sparking tools it there is any risk of flammable vapors being present.

107. Safety rules when using ladders? 

1. The foot wear is not greasy, oily and muddy and has a good grip on the rungs. 

2. When climbing or coming down a ladder should be face the ladder side and had on with both hand. 

3. Carry light tools in pockets in a shoulder bag. 

4. Hold on with at least new hand if use of both hands then, use safety belt 

5. Never climb higher than the third rung from the top on straight or second tired from the top on extension ladder. 

6. Step ladder must be fully open and the divider locked 

7. Metal ladder shall not be used near electrical equipment’s. 

8. Metal ladder shall not be place on firm footing and at angle of 75

9. Any ladder found defect in any way should be marked do not use 

10. Ladder shall not be placed on a box or drum. 

11. Rubber protection on head and heel of a ladder is necessary.

108.Safety rules insuring oxygen cylinders? 

1. Oxygen cylinders should not be kept near combustible materials. 

2. Oxygen cylinders should not be handled with grassy hands or gloves. 

3. Oxygen cylinders and their fittings should not be tested with oil based soap solution. 

4. Oxygen cylinders and other combustible gas cylinders should not be stored together. 

5. The top cover of the cylinder should be kept in position and screwed safety when not in use. 

6. Cylinders should not be used as rollers for moving materials 

7. Oxygen must not be used for ventilating confined spaces.

109. Safety rules in using compressed air? 

1. Only authorized persons should use compressed air. 

2. The body or clothes should not be cleaned with compressed air. 

3. Compressed air hose pipes should not be placed across passage ways 

4. Leakage of compressed air should not be tested with hands. 

5. While working with tools run by compressed air safety shoes are to be used. 

6. The tools should not be kept on position when not in use.

110. Handling of compressed gas cylinders?

1. They are not to be dragged or dropped 

2. They should be stored in dry and well ventilated places 

3. Chins and slings should not be used for lifting cylinders. 

4. the caps of the cylinders should not be removed when they are not the use. 

5. Cylinders should not be stored near hot sources 

6. Acetylene cylinders should not be stored horizontally 

7. Empty cylinders and fully cylinders should be stored separately 

8. Leakage cylinders removed to open space and release the gas without getting ignited.

Thanks for reading - Safety Interview Questions 11
Naitik Patel
Industrial Guide

Share this blog with your friends from here 👇

Previous Post Next Post