Translate

Safety Interview Questions 17 contains questions about accidents in poor house keeping,  advantages in good house keeping, maintenance of hand tools, prevent accidents of power tools, hard tools, precautions for electrical work, accident in construction, standards for PPEs.

161. What are the accidents in “poor house keeping”?

162. What are the advantages in good house keeping?

163. How to care and maintenance of hand tools?

164. How to prevent accidents of “power tools”?

165. What are the causes of accidents of “hard tools”?

166. what precautions are necessary for electrical work?

167. What are the hazards in construction?

168. Cause of accident in construction?

169. General safety precautions in construction?

170. Safety standards for basic PPEs

161. What are the accidents in “poor house keeping”?

• Men getting hit by falling from overhead

• Men slipping as greasy, wet or dirty floor

• Men failing in open tank without cover in level floor

• Accidents due to poor lighting

• Fire accidents due to faulty electrical wires

162. What are the advantages in good house keeping?

• It helps in the reduction of accidents including fire accidents

• It saves the property damages

• It improves employee morale

• Better productivity

• Working area becomes presentable

• Human energy is conserved

• Visitors are very much satisfied

• The burden of supervisor is reduced

163. How to care and maintenance of hand tools?

o Tools must be kept clean and free from corrosion

o Keep metal parts lightly oiled

o Remove burrs from edges of tools and heads of chisels.

o Tools which are not in use must be stored separately

o A good worker regularly inspects his tools

o Do not use tools without handles

164. How to prevent accidents of “power tools”?

• The operators should wear face shields or safety glasses

• Power tools should be placed in the store room after use

• Power tools should have protected by guards

• Pneumatic hoses or electric cables of power tools should not pass through passage ways.

• The electrical power tools should be properly earthed

• Never horse play with hose of pneumatic tools

• Power tools machines should be maintained and operated properly.

165. What are the causes of accidents of “hard tools”?

• Due to wrong way using of tools.

• Due to defective condition of tools

• Due to failure of using right tools for right job

• Due to wrong way of carrying tools

• Due to strong of tools in safety

166. what precautions are necessary for electrical work?

• All electrical installations shall be as per standard electricity rules

• Only competent persons should handle the electrical equipment.

• The equipment should be earthed properly

• All temporary electric lines should be drawn at least above man’s height

• Cable should be completely insulted

• Cable should not have any joints

• Only connection for one point

• Good house keeping on the area

• Fire protection equipment to be kept near by

• Use rubber gloves and rubber boots

• Use good quality of wire

• Power isolation close to the job

• Use three pin plug instead of loose wire

• Never operate any electrical equipment with wet hands

• Never stand wet surface while working electrical equipment

• During thunder storm do not stand under tree

• Proper sign board is necessary

• No person shall work on any live electrical conductor

• The switch shall only be put on by person who switched it off

167. What are the hazards in construction?

• Fall of person from top and getting injured

• Fall of objects from top and below person injury

• Fall of materials from top and damaged

• Person falls into excavated pit

• Collapse of soil and below person get injury or may

• Damage of ug cables and sewage pipe

• Collapse of scaffolding and person fall from height, get injury

• Electrical shock

• Fire and explosion

• Burn injury

• Health and lung problems

• Snakes bite

• Poisonous gas

• Foreign body in eye

168. Cause of accident in construction?

• Erection equipment failure

• Falling of persons from height

• Electrical shocks

• Improper lighting

• Non-stop working by worker

• Up safe work methods

• Collapsing of earth during trench excavation

• Failure of use safety equipment

• Working a height without safety belt

169. General safety precautions in construction?

• Adequate first aid equipment should be kept ready

• Adequate fire fighting equipment should be available

• All general electrical rules should be followed

• Suitable lighting arrangements should be necessary at night work

• Work men at height should be wearing safety belts

• Work men handling cement should be provided with goggles, rubber gloves and rubber boots by nose mask.

• The moving parts of grinding machines used construction site should be covered with guards

• The moving parts of grinding machines used construction site should be covered with guards

• Excavated material should not be kept near the excavated

• Very short duration of work red flags must be hoisted and more duration red banners must be stretched

• Defective tools should not be used

• The worker should not carry tools in his hands when climbing a ladder

• Excavation should be guarded by suitable fencing

170. Safety standards for basic PPEs

SAFETY STANDARDS

HELMET: --------------- Z-89.1 1981 (ANSI) *5240 (BS)

SAFETY GLASS:--------- Z-87.1 1968 (ANSI) *2092 (BS)

SAFETY HARNESS------ Z-359.1 & Z-10.14 (ANSI) *1397 (BS)

SAFETY SHOES---------- Z-41.1 1967 (ANSI)

RESPIRATOR------------- Z-88.2 1992 (ANSI)

SAFETY ON SCAFFOLDING—A-10.4 1988 (ANSI)

Read more about "Safety blogs" from Industrial Guide - Click here


 

Thanks for reading - Safety blogs
Naitik Patel
Industrial Guide

Share this blog with your friends from here 👇

Previous Post Next Post